A Stormstop garage door brush strip seal is the best solution for closing gaps around your garage door. You can effectively keep draughts and the elements out while improving the insulation of your garage with our easy-to-install brush strips. With this simplified guide, you’ll be able to have a professional installation.
The first step is to measure the interior width of your garage door frame and cut the seal to size. Line up the seal's corner with the underside of the frame, ensuring the inner corner meets the closed door's front face.
Peel the backing off the double-sided tape and press the seal firmly onto the frame, working section by section. Ensure the seal tip touches the closed door's front face. For added security, use the provided self-tapping screws. Finally, close the door to ensure everything is working smoothly.
For a detailed diagram with step-by-step instructions on how to fit your Stormstop garage door brush strip seal, download the PDF or for more information, contact our friendly team.
Choose the best position to fix your brush strip garage door seal to the bottom inside edge of the garage door. If necessary, pre-drill holes in the seal carrier.
Use clamps or strong tape to secure the brush strip carrier for drilling. A second person helping to hold it can simplify the process.
When the brush strip is in position, mark the screw holes with a pencil. You can either use the existing holes or drill your own with a 2.5mm drill bit.
Fasten the self-tapping screws provided with your brush strip with a screwdriver or a drill and remove any clamps.
To finish, make sure the garage door closes properly and trim the ends of the seal if nccesary.
