Stormstop garage door multi seal is a versatile and simple solution to close multiple gaps around your garage door. This guide will help you have a professional installation in minutes.
The seal roll should be unravelled ahead of time so that they are straight and easier to fit. Measure the door's overall width and cut the multi-seal to size. Then, prepare the area to ensure a clean and secure fit by wiping down the underside of your garage door.
Peel off the backing from the pre-attached double-sided tape and firmly press the seal onto the bottom of the door, aligning the smaller edge with the outside. For additional security, use self-tapping screws that are included along the length of the seal.
This Stormstop multi-seal can also be positioned vertically on the sides of your garage door or frame for all-around weatherproofing.
Fitting a garage door multi seal from Stormstop is simple but for more information view the detailed step-by-step diagrams, or contact our team who will be happy to help.
The seal roll should be unravelled ahead of time so that they are straight and easier to fit. Next, measure the entire width of the garage door and cut the garage door multi seal to the appropriate length.
Using a pencil or marker to mark the correct length can make this easier as well as having a pair of scissors or sharp utility knife on hand which should give you a clean cut.
Prep the area by wiping down the underside of the garage door. Next, start to apply the double sided tape to the bottom of the garage door. As you're applying it, press it down firmly to prevent air bubbles from forming.
Make sure the edge of the tape aligns with the outside edge of the door. Cut off the end and remove the release paper.
Align the garage door multi seal by carefully sticking down the smaller face from one edge and press it into place along the enitre width of the door. This seal can also be placed upright on the sides of your garage door for extra weather protection.
As you're applying it, press it down with the palm of your hand. You can also use a roller if you have one. Check that it is not bunching/twisting as you go.
Please use the self-tapping screws included with your garage door multi seal to fix the entire length in place. Make sure to space the screws evenly across the strip so the seal remains tight and check that it remains straight as you fasten each section.
